Mini Kit Fun: Full Sunshine

Awhile back we had gotten a miniature kit off of Amazon, the Full Sunshine (H-003) of the Sunshine Series by Cute Room. It turned out to be a fun, little kit loosely in 1:24 scale. So for today I’m going to show you what we did, what we changed and our opinion of it. This would also be able to help you if you where doing the kit or a similar one, since the instructions are not in English.

Now before we get off on how we did this I do need to say that we did change things… Quite a few things but, I wanted a slightly different look, and the fabric I felt that came with it had too large of prints for 1:24 scale so we changed it, to something we have for making bedding and pillows in 1:24 scale for our shop. You can check them out soon, bedding sets like the one on the bed in the box, with a pillow of course, will be on our shop. Now where was I… ahh yes, on to building the little box!!

Now this little kit came in this cute little box, with each set of parts separated to make it a little easier. Now I do need to point out it did come with two instruction the colored ones are the original ones, but it did come with a xeroxed set in English. I was actually quite impressed, it really did have everything, but the glue, that you would need and was quite fun to put together.

This slideshow requires JavaScript.

The first step that we did was getting the walls and floor covered and ready to be put together. You do have to cut them out then glue them on. I personally used Grandmother Stover’s Stickflat Glue, which is what I had on hand for my 1:12 scale dollhouses, but you could just as easily use a glue stick. It was quite easy, and the paper stuck well to the wood.

After it had dried we glued the three pieces together using Aleene’s Tacky Glue. and held them together while they dried with blue tape. I use the blue tape to keep it together because it doesn’t pull the material or rip the finish off what it is stuck to. It is the same stuff I use on my 1:12 scale dollhouses, non-sticky and strong.

This slideshow requires JavaScript.

The furniture was a little tricky to keep straight, so I turned again to the blue tape, to hold it in place. I recommend going slow, and taking your time, if you don’t want to use the tape and want to see you can hold it in place until it sets too.

To get the window into place, I cut it out with the exact-o knife then glued each piece on with tacky glue. I then added the valance a piece of lace from the kit, which I changed as well that wasn’t the actual place for it. To fit my taste for the room.

You then have to cut out all the pieces that you want, and fold and glue them all together. I then glued all the pieces down and where I wanted them to get the finished look.

And this is my finished project. I really  did like the kit. It allows you to create a little room that can fit your own tastes and you can do yourself since it has all the parts to make it. I would recommend the kit if you want to try your hand at making things yourself, but you do need to have patience to do it. I will say that, but it is fun.

Would you like to see us do another one of this style??

~Briana Signing Off

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s