Posted in Dollhouses, Sunshine Shop (Three Gables House), Updates

2018 Creating Contest Update

Here I am sitting by the toasty fire looking at our almost finished house for the hobby builders contest for 2018 ( miniatures.com). We have like 4 Days left to finish, and I think we are going to make it!

We started it last summer and thought we would have it done way ahead of time but procrastination and other projects kept it moving at a snails pace. Maybe we just like to work under pressure!

We changed our mind a couple of times on the look we wanted for the outside of the house but finally decided on brick and siding. I have to say I’m very tired of doing brickwork in miniature. It took me way longer than I had anticipated to glue all the tiny bricks onto the house. Then came the siding; this turned out to be a little more difficult than we thought. Once we got it figured out it did go fairly smoothly. I did have to call on my husbands help in a couple spots!

Brickwork on the back of the house
 A close up of the brickwork on the back of the house.
Siding on the 2018 Creating Contest house from Hobby Builders Supply/Miniatures.com
The siding going up on the contest house!

I have to say it’s looking good so far and I’m confident we are going to meet our deadline!

Posted in DIY's & How-To's, Dollhouses, Sunshine Shop (Three Gables House), tutorials

How To Do A Textured Drywall Wall In Dollhouse Scale

It’s been ages since I’ve gotten a chance to post something to the blog, summertime seems to make everything  get busier. Any who, I finally got a chance to work on our in-progress house, and I wanted to show you how I made the statement wall in it. (Feel free to ask questions if you have them!!)

So on to the tutorial, of how to make a dollhouse textured drywall or plaster wall.

So to do this I used Spackling Compound, you could use something similar like joint compound, but Spackling Compound is lighter in texture so I went with that for the look I was going for.plaster wall bakery-0524

You will also need a putty knife (or something stiff you can wipe off), sandpaper (I used 220), something to create the texture (I used an old wash cloth), paper towels (for clean up), wax paper or something similar (to protect your work surface), some paint primer (to prime and protect the wall and get it ready to add color), and some paint (if you want it colored).

To get started make sure your work surface is protected and get your putty knife and Spackling Compound out. To begin with I applied a thin layer of the compound and just made sure it covered the entire wall and let it dry. I then sanded the wall smooth, do be careful doing this since the dust isn’t real good for you to breath.

plaster wall bakery-0514

Once it was smoothed to my liking, and the dust vacuumed up, I went in applied another coat of the compound. I made it a hair thicker than last time so that the texture had a better chance of showing and imprinting in deeper. So once I had as even a layer as I could get I took the washcloth and started dabbing it on the wet wall till I got a result I liked. Like I said you can use almost anything to texture, it just depends on the look you want it the end. This is the texture of the wash cloth I used if you where curious.

plaster wall bakery-0522

Now I did lightly sand the wall again after I textured to knock of any really high points, and to bring it all together as a whole wall but that is entirely up to the person doing it and how it looks to you. Here it is before I sanded…

plaster wall bakery-0518

Now once its to where you want it to look you go in and add primer to it. The primer will help protect the primer from getting dirty and from moisture, it also will get it ready for painting so it doesn’t “eat” your paint.

Here it is after sanding and primer!!

plaster wall bakery wall-0520.jpg

I really like how it turned out and I hope this tutorial will help you in your own mini adventures!!

~Briana Signing Off